Nailing down vinyl frames is not like installing other types of siding. If you tried to treat vinyl like you treat wood installation projects, the vinyl can fail over time.
Which type of fastener is best for attaching vinyl is obvious once you realize the properties of the material and the methods of driving screws as opposed to driving nails.
Use nails on siding. The benefit of aluminum nails lies in the metal, which does not react with cedar or redwood. Railing posts may require stronger fasteners, such as hex bolts or nuts and washers. If a homeowner intends to install his own siding, the importance of using the correct nails can not be expressed enough.
Find quality siding nails online or in store. If you want to improve the look of your home without painting, vinyl siding is a popular, affordable choice. Down from the top edge at each stud, no more than 16 in.
Do they need to be stainless steel (expensive), ringshank or I have even heard of contractor using roofing nails. The standard aluminum siding nail is a 6d wood siding sinker (about $3.60 a box) that has a thin shank to avoid splitting the siding. Siding Nails – Nails – The Home Depot Store Finder
Get free 2-day shipping on qualified Siding Nails products or buy Hardware department products today with Buy Online Pick Up in Store. Into solid wood or 1-1/4 in. I am siding my brothers house and am using 3/8 LP Smartside for the first time.
Nails for vinyl siding Your best bet is to use hot dipped galvanized roofing nails. Installation, Care, and Maintenance of Wood Shake and Shingle Siding gives handy advice to the homeowner who wants to install cedar siding.. What kind of nails do you use to hang vinyl siding?
The problem should be easy to diagnose. With relatively blunt tips and thin shanks, siding nails reduce splitting during installation. What nails are people using?
Maze Nails, and many other manufacturers, offer stainless-steel siding nails in many sizes, including 3.5 inches. Vinyl window framework and siding are often installed as one project, and both use the same types of nails and attachments to keep them in place. The size of the nails to use depends on the type and thickness of siding.
Finding the right nails is not difficult if you know what you need. Siding nails can be countersunk or hidden with a coat of paint. What makes you think alum.
Fastening Tips for HardiePlank® Lap Siding TECHNICAL BULLETIN. The web site says 8d. You can use a hand-powered staple gun, but both nails and staples must.
There are screws and nails which are both types of fasteners. Nail placement for cedar shingles up to 10 inches (254 mm) wide requires two corrosion-resistant nails driven 3/4 inches (19 mm) from each edge and 1 inch (25 mm) above the exposure line. If anyone has put this siding up I would like your real world experience.
Into the solid wood (wood sheathings like OSB and plywood count toward the 1-1/4 in., but “soft” sheathings like. The use of rooﬁ ng nails (11GA) are not approved in this application. Use 6d or 8d galvanized or stainless siding nails and install a single nail about 1-in.
Choose stainless steel, ring-shank siding nails or hot-dipped galvanized siding nails. For this reason, manufacturers design it to hang loosely on the nails rather than to be tightly nailed like wood siding. Use aluminum, galvanized steel, or other corrosion-resistant nails, staples, or screws when installing vinyl siding.
At least one manufacturer makes a 7d redwood siding nail with a twisted shank to resist pullout. Many homeowners and builders choose it because it's long lasting, durable, inexpensive and relatively easy to install and maintain. If using ring or spiral shank nails.
Nails can be blunted by tapping the points with a hammer. The nail gun you use for siding will have to be able to handle siding nails. Simply go outside, grab the lower edges of a siding course and try to slide it back and forth (Photo 1).
Many builders choose nails because they're easier to. Blunt nails are harder to drive but less likely to split wood. Nails bend to easy?
Keep in mind that the siding has weep holes drilled in it becasue moisture and vapor do get behind the vinyl. Ive never used Roofers on vinyl siding because I once asked if it was ok to use galv.roofers and was told by the supplier, " no because they are used for the roof ,alum. Here is a link to the relevant Maze Nails page:
Whether for wood, metal or vinyl siding, the devices used to attach them to a home are called fasteners. These have small ridges on the sides to prevent the nail from pulling out of the siding after installation. First of all, I love stainless-steel siding nails.
Whether you install clapboard, T1-11, cedar shakes, or board-and-batten siding on your house, you can attach it with either nails or screws. HardiePlank® lap siding may be used with fasteners approved by ICC-ES ESR-2290 spaced in accordance with the Wind Load Tables. Fasteners must be corrosion resistant, galvanized or stainless steel.
Use electro, or hot-dipped galvanized steel or aluminum roofing type nails with a diameter of 1/8″ and a nail head of 3/8″ or larger. Aluminum trim pieces require aluminum or stainless steel fasteners. These nails will not rust even with exposure to the elements.
Vinyl siding tends to expand and contract considerably with temperature changes. Common nails and box nails are general-purpose woodworking fasteners; I use them for all types of outdoor projects.
Electro-galvanized nails are acceptable for use with James Hardie Siding Products, but may exhibit premature corrosion.
The electro-plated nails are easier to handle and work with, but they are more likely to rust. Corrosion-resistant nails, galvanized or made of aluminum, stainless steel or similar materials may cost more, but their use will insure spot-free siding under adverse conditions. Fasteners must be corrosion.
If you are installing vinyl siding manually with no power tools, then nails are your only real option.