Wallpaper: Ul Assembly Fiber Cement Roof Ceiling
Total Visited: 82 views
Questions often arise about the construction needed to achieve a Class A, B, or C fire rating for a roof assembly. Traditionally at 3/4" x 4' x 8', this panel cuts and installs with standard carpetry tool and equipment.
Ul assembly fiber cement roof ceiling. All-new fire-rated roof-ceiling assembly files. Trusses supporting metal roof deck panels covered by 1/2” (12.7 mm) regular gypsum sheathing either loose laid, or adhesively or mechanically attached to roof deck. ©2013 Slide 28 of 41 2-Hour Exterior Wall Assemblies with FRCC OSB.
Optional – 3 1/2" thick glass fiber insulation draped over furring channels – Optional Ceiling damper. Wide on top and 2 ¾ in. Wide at bottom by 7/8 in.
UL Designs & Thickness — Roof Assemblies We are inspired to influence how the world is built. More about UL support for code authorities. Mineral Fiber Wall Boards Mineral Fiber Wall Boards.
For the most up-to-date fire-resistance ratings, refer to the UL Online Certifications Directory, UL L521. UL Assembly Approved Ceiling Tile/ Suspension Maximum Fix. Armoroc is a lightweight, fast alternative to poured concrete and because we offer a wide variety of UL tests and accept most finish systems, Armoroc is ideal for your fire-rated.
This practice has been shown to reduce the fire-resistance rating. Partition assembly, mineral fiber, glass fiber, or cellulose fiber. Fire Resistance Assembly Rating;
Thick PVC coated non-woven fiberglass mesh, 0.368 lbs/sq yd loose laid over the floor mat material. Two types of fire-rated construction assemblies pertain to acoustical ceiling systems: Fiber Glass Reinforcement – (Optional, Not Shown) – 0.015 in.
What are these ratings? You can use only the specific type, size, and.
Estimated range of acoustical performance is based on laboratory test data of similarly constructed assemblies. 8 Subflooring — Min 23/32 in. Spread of Flame, Intermittent Flame, and the Burning Brand.
Thick plywood wood structural panels, min grade "Underlayment". Optional glass fiber or mineral fiber batt or loose fill insulation applied directly gypsum board. The UL 790 (ASTM E 108) Standard Test Methods for Fire Tests of Roof Coverings
Resistance ratings for wall and floor/ceiling assemblies. Armoroc Structural Cement Board is a fire-resistant alternative to wood based sheet-goods and poured systems. (ANSI/UL 1256), and Roof/Ceiling Fire Resistance Rating (UL 263, ASTM E119, NFPA 251, or UBC 7-1).
Our CAD and Revit library of design drawings of wall intersections, joints and other construction details.. Code requirements or roof and wall assemblies,. CEMENT BOARDS OTHER CEMENT BOARDS FIBER.
No ceiling or suspension system product alone constitutes a fire-rated assembly. Fire Resistance Ratings – ANSI/UL 263 See General Information for Fire Resistance Ratings – ANSI/UL 263 Design No. The Standards Council of Canada recognizes UL as an accredited testing.
Trusses supporting metal roof deck panels covered by 1/2” (12.7 mm) regular gypsum sheathing either loose laid, or adhesively or mechanically attached to roof deck. Results in UL Design V314, a viable assembly. As such, three test procedures are included in UL 790:
The insulation shall be installed to a point 12" beyond the pipe or duct. Steel studs in accordance with the specifica-tions in Design No. The UL version of ASTM E108 is UL 790.
Backer Board & Cement Board. Fiber Cement Siding Maintenance . Plywood DK t t DK tile e Dliquid or sheet membrane latex-fortified mortar g wood or steel joists carpet 3⁄4" min.
Added to floor-ceiling or roof-ceiling systems to increase either STCs or R-values. Fire and Sound ratings. Estimated range of acoustical performance is based on laboratory test data of similarly constructed assemblies.
Face grain of plywood to be perpendicular to the trusses with joints staggered. Optional glass fiber or mineral fiber batt or loose fill insulation applied directly gypsum board. Stucco, steel, fiber cement facings ©2013 Slide 38 of 41 Partition Walls between Living Spaces Red Leaf Townhomes, Seattle, WA.
(25 gauge) thick gal-vanized steel, 1 5/16 in. For the most up-to-date fire-resistance ratings, refer to the UL Online Certifications Directory, UL G556. DUROCK Cement Board Systems ny SA932 6 tile 3⁄4" min.
Only products which bear UL's Mark are considered as Classified, Listed, or Recognized. Description STC Test No. All openings between top of wall and roof deck are to be filled with UL Classified miner-al wool or glass fiber insulation.
Click the link above, each design number below represents a James Hardie 1 hour Fire Resistive Wall Assembly • JH/FCS 60-01 • JH/FCS 60-02 • JH/FCS 60-03 • JH/FCS 60-04 • JH/FCS 60-05 Fire-Rated Ceiling Assemblies Suspension Ceiling Designs. Floor-ceiling or roof-ceiling assembly is permitted provided that one additional layer of gypsum board of the same type specified in the design is added to the ceiling.
L563 February 26, 2015 Unrestrained Assembly Rating – 1 Hr The addition of up to 163/4inches of 0.5 pcf glass fiber insulation (R-40), either batt or loose-fill, to any 1- or 2-hour fire resistance rated floor-ceiling or roof-ceiling system having a cavity Plywood or OSB subfloor Note:
P921 September 27, 2011 Restrained Assembly Rating — 1, 1-1/2 or 2 Hr (See Items 4, 6, 7 and 9) L Meets UL classifications for one- and two-hour fire-rated assemblies l Building code approved – one substrate that does the job of many OFFERS BEST-IN-CLASS WARRANTY Roof/ceiling and floor/ceiling construction assemblies, which are tested and assigned hourly ratings mandated by building codes or other building safety requirements.
QUICK SELECTOR GENERAL REFERENCE QUICK SELECTOR FOR FIRE AND SOUND RATED SYSTEMS Gypsum Wallboard Floor/Ceilings – Wood Framing (floor truss)(CAD FILE NAME GOLDS.DWG OR GOLDS.DXF) No. Wall Test Furnace Wall Assembly Test. UL tests rate an entire assembly.
Uneven Hardwood 87 views
Urban Ladder No 62 views
University Comm 69 views
Undermount Sink 56 views
Us Storage Cent 89 views
Union Place Apa 82 views